banner

Products

Home Products Steel Flange Threaded Flange

Stainless Steel Threaded Flange-WS1

Screwed Flange Dimensions In Mm
Flange With Threaded Connection
Threaded Companion Flange
Stainless Steel Threaded Flange

Stainless Steel Threaded Flange-WS1

Threaded flanges, also sometimes referred to as companion flanges / screw flanges / NPT flanges, contain a female NPT thread in the center for connection to male NPT threaded piping. Threaded flanges are common when creating reducing connections. Other thread styles are available for machining, aside from the standard NPT form as designated by the ASME B16.5 specification.

  • Size :

    Size: 1/2”-60”
  • Standard :

    ANSI, JIS, DIN, BS,GOST
  • Material :

    Stainless Steel (ASTM A182 F304/304L, F316/316L, F321)
  • Pressure :

    CLASS 150, CLASS 300, CLASS 600, CLASS 900,CLASS 1500, CLASS 2500, CLASS 3000
  • Face type :

    F.F., R.F., R.T.J. ,M.F.,T.G.

Stainless Steel Threaded Flange-WS1

 

Even though the threaded flange design is available in many sizes and pressure ratings, it is mainly used for small sized piping systems i.e. ≤ 4 inches. Its usage is also typically restricted to non-toxic systems, low pressure systems, and low temperature systems. ½ inch to 2-inch size threaded flanges are much more common than sizes of 2 inches and above. Due to their lower pressure applications, threaded flanges use flat and raised faces only. They are not suitable for high temperature applications because the thread geometry would distort, which often leads to leakage.

 

 
 
The major advantage with threaded flanges is that they can be connected to a pipe without the need for welding. Forming joints without needing to weld is a considerable advantage, and is essential in some locations and industries e.g. explosive areas (Ex rated areas) such as petrol stations, hexagon plants, stores with flammable fluids etc. If no welding is required, a potential source of ignition is removed. Another advantage is that it is quicker and easier to assemble and disassemble a threaded flange joint than a welded flange joint. 
 
Threaded flanges are not suitable for pipes that have a thin wall thickness, since cutting a thread on such pipes is difficult. In some cases, a seal weld may be used to increase the flange’s integrity and reduce the likelihood of leakage. Adding a seal weld will increase the flange’s integrity, but it also makes the joint more difficult to assemble and disassemble (because the weld makes it a permanent joint).
 
 
 
 
 
 
 
 
 
 
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

Screwed Flange Dimensions In Mm
Stainless Steel Threaded Flange-WS1

Threaded flanges, also sometimes referred to as companion flanges / screw flanges / NPT flanges, contain a female NPT thread in the center for connection to male NPT threaded piping. Threaded flanges are common when creating reducing connections. Other thread styles are available for machining, aside from the standard NPT form as designated by the ASME B16.5 specification.

Flange With Threaded Connection
Stainless Steel Threaded Flange-WS2

Threaded flanges, also sometimes referred to as companion flanges / screw flanges / NPT flanges, contain a female NPT thread in the center for connection to male NPT threaded piping. Threaded flanges are common when creating reducing connections. Other thread styles are available for machining, aside from the standard NPT form as designated by the ASME B16.5 specification.

Threaded Companion Flange
Stainless Steel Threaded Flange-WS3

Threaded flanges, also sometimes referred to as companion flanges / screw flanges / NPT flanges, contain a female NPT thread in the center for connection to male NPT threaded piping. Threaded flanges are common when creating reducing connections. Other thread styles are available for machining, aside from the standard NPT form as designated by the ASME B16.5 specification.

Stainless Steel Threaded Flange
Stainless Steel Threaded Flange-WS4

Threaded flanges, also sometimes referred to as companion flanges / screw flanges / NPT flanges, contain a female NPT thread in the center for connection to male NPT threaded piping. Threaded flanges are common when creating reducing connections. Other thread styles are available for machining, aside from the standard NPT form as designated by the ASME B16.5 specification.

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

home

products

WhatsApp

CONTACT US