Tel : +86-18059296519
Whatsapp : +8618059296519
Email : [email protected]
A seamless steel pipe is a circular pipe having a hollow section and no seams around it. The seamless steel pipe is made of carbon steel, alloy steel, stainless steel ingot or solid tube blank, and then is made by hot rolling, cold rolling or cold drawing. Seamless pipes are considered superior to welded pipes as they are built using monolithic steel billets, with intrinsic mechanical strength, without seam welds.
Size :
outer diameter 5-630mmStandard :
GB, JIS, ASTM, DIN, EN, AISIMaterial :
201, 304, 316, 304L, 316L, 321, 904L, etc.Thickness :
0.5-75mmProcess :
hot rolling/cold rollingSeamless Steel Pipe-EC2
Seamless steel pipes have a hollow section and are used in large quantities as pipelines for conveying fluids, such as pipelines for conveying oil, natural gas, gas, water and certain solid materials. Compared with solid steel such as round steel, steel pipe has a lighter weight when the bending and torsion strength is the same, and it is a kind of economical cross-section steel. It is widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipes, automobile transmission shafts, bicycle frames, and steel scaffolding used in construction.
The production of our seamless pipes is tightly regulated and all of the pipes we stock have been fully tested to international standards to ensure we only supply the highest quality products.
Technical data
Seamless Steel Pipe Chemical Composition
This data is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
|
Standard |
Grade |
Chemical Composition (%) |
Mechanical Properties |
|||||
|
ASTM A53 |
C |
Si |
Mn |
P |
S |
Tensile STrength(Mpa) |
Yield STrength(Mpa) |
|
|
A |
≤0.25 |
- |
≤0.95 |
≤0.05 |
≤0.06 |
≥330 |
≥205 |
|
|
B |
≤0.30 |
- |
≤1.2 |
≤0.05 |
≤0.06 |
≥415 |
≥240 |
|
|
ASTM A106 |
A |
≤0.30 |
≥0.10 |
0.29-1.06 |
≤0.035 |
≤0.035 |
≥415 |
≥240 |
|
B |
≤0.35 |
≥0.10 |
0.29-1.06 |
≤0.035 |
≤0.035 |
≥485 |
≥275 |
|
|
ASTM A179 |
A179 |
0.06-0.18 |
- |
0.27-0.63 |
≤0.035 |
≤0.035 |
≥325 |
≥180 |
|
ASTM A192 |
A192 |
0.06-0.18 |
≤0.25 |
0.27-0.63 |
≤0.035 |
≤0.035 |
≥325 |
≥180 |
|
API 5L PSL1 |
A |
0.22 |
- |
0.90 |
0.030 |
0.030 |
≥331 |
≥207 |
|
B |
0.28 |
- |
1.20 |
0.030 |
0.030 |
≥414 |
≥241 |
|
|
X42 |
0.28 |
- |
1.30 |
0.030 |
0.030 |
≥414 |
≥290 |
|
|
X46 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥434 |
≥317 |
|
|
X52 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥455 |
≥359 |
|
|
X56 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥490 |
≥386 |
|
|
X60 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥517 |
≥448 |
|
|
X65 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥531 |
≥448 |
|
|
X70 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥565 |
≥483 |
|
|
API 5L PSL2 |
B |
0.24 |
- |
1.20 |
0.025 |
0.015 |
≥414 |
≥241 |
|
X42 |
0.24 |
- |
1.30 |
0.025 |
0.015 |
≥414 |
≥290 |
|
|
X46 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥434 |
≥317 |
|
|
X52 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥455 |
≥359 |
|
|
X56 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥490 |
≥386 |
|
|
X60 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥517 |
≥414 |
|
|
X65 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥531 |
≥448 |
|
|
X70 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥565 |
≥483 |
|
|
X80 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥621 |
≥552 |
|
Seamless steel pipe sizes in mm
Out diameter: 1/2 inch - 36 inch (21.3mm-914.4mm)
Thickness: 2.11mm-60mm ( SCH10, SCH20, SCH40, SCH80, STD, SCH120, SCH160, XXS)
Seamless pipe specification chart
| OMINAL PIPE SIZE | OD(mm) | NOMINAL WALL THICKNESS | |||||||||||||
| DN | NB(inch) | ASME | SCH10 | SCH20 | SCH30 | STD | SCH40 | SCH60 | XS | SCH80 | SCH100 | SCH120 | SCH140 | SCH160 | XXS |
| 15 | 1/2" | 21.3 | 2.11 | 2.41 | 2.77 | 2.77 | 3.73 | 3.73 | 4.78 | 7.47 | |||||
| 20 | 3/4" | 26.7 | 2.11 | 2.41 | 2.87 | 2.87 | 3.91 | 3.91 | 5.56 | 7.82 | |||||
| 25 | 1" | 33.4 | 2.77 | 2.9 | 3.38 | 3.38 | 4.55 | 4.55 | 6.35 | 9.09 | |||||
| 32 | 1.1/4" | 42.2 | 2.77 | 2.97 | 3.56 | 3.56 | 4.85 | 4.85 | 6.35 | 9.7 | |||||
| 40 | 1.1/2" | 48.3 | 2.77 | 3.18 | 3.68 | 3.68 | 5.08 | 5.08 | 7.14 | 10.15 | |||||
| 50 | 2" | 60.3 | 2.77 | 3.18 | 3.91 | 3.91 | 5.54 | 5.54 | 8.74 | 11.07 | |||||
| 65 | 2.1/2" | 73 | 3.05 | 4.78 | 5.16 | 5.16 | 7.01 | 7.01 | 9.53 | 14.02 | |||||
| 80 | 3" | 88.9 | 3.05 | 4.78 | 5.49 | 5.49 | 7.62 | 7.62 | 11.13 | 15.25 | |||||
| 90 | 3.1/2" | 101.6 | 3.05 | 4.78 | 5.74 | 5.74 | 8.08 | 8.08 | |||||||
| 100 | 4" | 114.3 | 3.05 | 4.78 | 6.02 | 6.02 | 8.56 | 8.56 | 11.13 | 13.49 | 17.12 | ||||
| 125 | 5" | 141.3 | 3.4 | 6.55 | 6.55 | 9.53 | 9.53 | 12.7 | 15.88 | 19.05 | |||||
| 150 | 6" | 168.3 | 3.4 | 7.11 | 7.11 | 10.97 | 10.97 | 14.27 | 18.26 | 21.95 | |||||
| 200 | 8" | 219.1 | 3.76 | 6.35 | 7.04 | 8.18 | 8.18 | 10.31 | 12.7 | 12.7 | 15.09 | 18.26 | 20.62 | 23.01 | 22.23 |
| 250 | 10" | 273 | 4.19 | 6.35 | 7.8 | 9.27 | 9.27 | 12.7 | 12.7 | 15.09 | 18.26 | 21.44 | 25.4 | 28.58 | 25.4 |
| 300 | 12" | 323.8 | 4.57 | 6.35 | 8.38 | 9.53 | 10.31 | 14.27 | 12.7 | 17.48 | 21.44 | 25.4 | 28.58 | 33.32 | 25.4 |
| 350 | 14" | 355.6 | 6.35 | 7.92 | 9.53 | 9.53 | 11.13 | 15.09 | 12.7 | 19.05 | 23.83 | 27.79 | 31.75 | 35.71 | |
| 400 | 16" | 406.4 | 6.35 | 7.92 | 9.53 | 9.53 | 12.7 | 16.66 | 12.7 | 21.44 | 26.19 | 30.96 | 36.53 | 40.19 | |
| 450 | 18" | 457.2 | 6.35 | 7.92 | 11.13 | 9.53 | 14.27 | 19.05 | 12.7 | 23.83 | 39.36 | 34.93 | 39.67 | 45.24 | |
| 500 | 20" | 508 | 6.35 | 9.53 | 12.7 | 9.53 | 15.09 | 20.62 | 12.7 | 26.19 | 32.54 | 38.1 | 44.45 | 50.01 | |
| 550 | 22" | 558.8 | 6.35 | 9.53 | 12.7 | 9.53 | 22.23 | 12.7 | 28.58 | 34.93 | 41.28 | 47.63 | 53.98 | ||
| 600 | 24" | 609.6 | 6.35 | 9.53 | 14.27 | 9.53 | 17.48 | 24.61 | 12.7 | 30.96 | 38.89 | 46.02 | 52.37 | 59.54 | |
| 650 | 26" | 660.4 | 7.92 | 12.7 | 9.53 | 12.7 | |||||||||
| 700 | 28" | 711.2 | 7.92 | 12.7 | 15.88 | 9.53 | 12.7 | ||||||||
| 750 | 30" | 762 | 7.92 | 12.7 | 15.88 | 9.53 | 12.7 | ||||||||
| 800 | 32" | 812.8 | 7.92 | 12.7 | 15.88 | 9.53 | 17.48 | 12.7 | |||||||
| 850 | 34" | 863.6 | 7.92 | 12.7 | 15.88 | 9.53 | 17.48 | 12.7 | |||||||
| 900 | 36" | 914.4 | 7.92 | 12.7 | 15.88 | 9.53 | 19.05 | 12.7 | |||||||
Seamless pipe manufacturing process
1. Seamless Hot Rolling Processes
Round Pipe Billet → Heating → Perforation → Three Roll Skew Rolling, Continuous Rolling or Extrusion → Off Pipe → Sizing (Or Reducing Diameter)→ Cooling → Billet → Straightening → Water Pressure Test ( Or Flaw Detection) → Marking → Storage
2. Seamless Cold Rolling (Cold drawn) Processes
Round Pipe Billet → Heating → Perforation → Head → Annealing → Pickling → Oil (Copper) → Multi Pass Drawing (Cold Rolling) → Billet → Heat Treatment → Straightening → Water Pressure Test → Marking → Storage
A seamless steel pipe is a circular pipe having a hollow section and no seams around it. The seamless steel pipe is made of carbon steel, alloy steel, stainless steel ingot or solid tube blank, and then is made by hot rolling, cold rolling or cold drawing. Seamless pipes are considered superior to welded pipes as they are built using monolithic steel billets, with intrinsic mechanical strength, without seam welds.
A seamless steel pipe is a circular pipe having a hollow section and no seams around it. The seamless steel pipe is made of carbon steel, alloy steel, stainless steel ingot or solid tube blank, and then is made by hot rolling, cold rolling or cold drawing. Seamless pipes are considered superior to welded pipes as they are built using monolithic steel billets, with intrinsic mechanical strength, without seam welds.
API 5L pipe is carbon steel pipe used for oil and gas transmissions, it includes the pipes manufactured in seamless and welded (ERW, SAW). Materials covers API 5L Grade B, X42, X46, X52, X56, X60, X65, X70, X80 PSL1 & PSL2 onshore, offshore and sour services.
API 5L X80 Pipe is a standardization for pipeline transportation systems within the rock oil, gas, water, and fossil fuel industries. API 5L-X80 steel is used in polar regions, wherever high toughness at low temperatures is needed.Product introduction API 5L X80 Pipe is a standardization for pipeline transportation systems within the rock oil, gas, water, and fossil fuel industries. API 5L-X80 steel is used in polar regions, wherever high toughness at low temperatures is needed.
Fluid pipe, originally named waterproof pipe, is a type of pipes that move liquids around in a similar manner as transport pipes. These pipes are created by combining transport pipes with pipe sealant. Fluid pipes can be used to transport oil, fuel, water and lava to different locations. These pipes allow liquids to be transported into engines, tanks and oil refineries. When a pipe is not connected to anything, it will fill itself up instead of pouring the contents on the floor.
Structural Steel Pipe is a welded steel pipe with an internal weld seam that is measured in nominal size unlike welded round tube. Structural steel is steel construction material, a profile, formed with a specific shape and certain standards of chemical composition and strength. Structural steel pipes has been engaged in steel fencing, handrails, columns, stove pipes, exhaust pipes, chimney pipes & poles.
Line pipe is a type of high strength steel pipe that is used for transporting petroleum, natural gas, oil, and water through pipelines across the country. Line pipes include seamless, welded carbon steel or stainless steel piping.
No.1633, Binhai Road, Wenzhou Economic Development Zone, Wenzhou, China
IPv6 network supported
